NOTE: 1.can’t work for Raspberry Pi Zero board 2.Power Supply is NOT included. 3.There is a sticker on the LCD screen. Please peel off before use. Features: 1)5.0″ TFT LCD Module, Resolution 800×400, SSD1963 Controller 2)LCD Type: TFT Transmissive Normal White super wide viewing angle 3)LCD Panel: HannStar HSD050IDW1 4)Interface: 8/16bit parallel bus interface 5)PCB Color: Blue 6)On board DC-DC Boost regulator TPS61040 to provide power supply to LCD backlight 7)Standard 2×20 2.54mm pin header for connection to MCU/development board Package Contains: 5inch HDMI LCD x 1 HDMI adaptor x 1 Touch pen x 1 RPi screws pack (4pcs) x 1 Tips for driver: After install the driver that could get the touch function work. 1.)Step1, Install Raspbian official mirror a)Download Raspbian official mirror（latest version）: https://www.raspberrypi.org/downloads/ b)Use“SDFormatter.exe“to Format your TF Card c)Use“Win32DiskImager.exe“ Burning mirror to TF Card 2.) Step2, Clone my repo onto your pi sudo rm -rf LCD-show git clone https://github.com/goodtft/LCD-show.git chmod -R 755 LCD-show cd LCD-show/ 3.)Step3, According to your LCD’s type, excute: In case of 5″ LCD sudo ./LCD5-show If you need to switch back to the traditional HDMI display sudo ./LCD-hdmi Wait a few minutes,the system will restart automatically, enjoy with your LCD Note: This method will be available only when your Rapspian connects with WIFI. If you do not have Wifi when you use it, you need to add drivers by yourself, you can contact us for tutorials or you can use the tutorials in CD directly.
Keine Erfahrungsberichte vorhanden